Camping, Adventure, Or Survival Water Purification
Chlorine dioxide is a powerful disinfectant, sanitizer, sterilant, and deodorizer that has been used for many years in a variety of applications. One of the most important uses of chlorine dioxide is for camping, adventure, or survival water purification. Chlorine dioxide effectively kills many waterborne pathogens, including bacteria, viruses, and protozoa. It is also simple to use and can be carried in small, lightweight containers, making it an ideal solution for outdoor enthusiasts.
In addition to its effectiveness as a water purifier, chlorine dioxide is also safer than alternatives. However, you should boil water whenever possible. It is non-toxic and does not produce harmful byproducts like other disinfectants, such as chlorine. It also does not leave any foul taste or odor in the water, making it ideal for drinking.
Using chlorine dioxide for water purification in outdoor settings is simple and straightforward. Typically, a small amount of chlorine dioxide is added to the water to be treated. A concentration of 0.8 to 1.0 ppm is recommended. The solution is then allowed to sit for 30 to 45 minutes to allow the chlorine dioxide to work its magic.
Chlorine Dioxide (ClO2) is an excellent choice for camping, adventure, or survival water purification.
Chlorine Dioxide (ClO2) is an excellent choice for camping, adventure, or survival water purification. It is a powerful oxidizing agent that eliminates harmful bacteria, viruses, protozoa, and bad tastes & odors from the water without leaving behind any residuals or byproducts. Additionally, it offers superior sanitization power compared to traditional chlorine treatments while providing a safe drinking experience for its users. ClO2 is also economical since it can be used with low concentrations making it highly cost-effective.
Furthermore, its fast-acting results make it ideal for those looking to treat their water with minimal effort quickly. With its many advantages, Chlorine Dioxide is an excellent choice for camping, adventure, or survival water purification. It is reliable and safe yet effective at eliminating contaminants from any body of water without causing adverse health effects. With its many benefits, it is clear why Chlorine Dioxide is the best treatment option for camping, adventure, or survival water purification. It is a practical, economical, and safe solution that quickly eliminates contaminants from any body of water without causing adverse health effects.
Overall, chlorine dioxide has many benefits as a disinfectant, sanitizer, sterilant, or deodorizer for camping, adventure, or survival water purification. It is effective, safe, easy to use, and does not produce harmful byproducts. Whether planning a weekend camping trip or a multi-day backpacking adventure, chlorine dioxide can help ensure that the water you drink is safe and free from harmful pathogens.
SKIN SANITIZER AND POTABLE WATER. ROUTINE DISINFECTION, OR IN EMERGENCY SITUATIONS FOR DRINKING WATER.
Use on skin contact for all ages including babies and animals. Deactivate germs at the source with an antimicrobial agent that cannot penetrate deeply into living tissues. No chemicals or harmful residue left behind, leaving skin feeling soft and odor-free. No wipe or rinse required. Use as an antimicrobial and general cleaning application for potable water systems, where there is a lack of fresh, clean drinking supply, such as a river, stream, or stagnant water vessel such as a pond, or storage container. Prepare activated solution to a strength consistent with the maximum EPA threshold for skin contact, consistent with a hand dip for poultry workers to sanitize and kill all germs in seconds, or a strength consistent with EPA maximum exposure for human ingestion and water systems.
| Use-Site | For a concentration of | Mix EQUAL PARTS 1:1 – NaClO2 (Part A) and HCl (Part B) |
| Potable Water | 0.8 PPM | 1 drop A, with 1 drop B in 1.2 gallons of water |
| Hands and Skin | 50 PPM | 50 drops A, with 50 drops B in 1 gallon of water. (2ml = 50 drop |
Mix recommended strength in the corner of a designated plastic mixing container. Let the solution activate for 1 minute before dilution, then fill with water. Agitate until mixed. Use as a solution in a manner consistent with usual standards. Let the solution sit in water for 45 minutes before drinking.
- SPRAY / FOG – allow visible wetness for 5 minutes before drying.
- MOP – allow visible wetness for 5 minutes before drying.
- SWAB / SPONGE – allow visible wetness for 5 minutes before drying.
- SOAK / IMMERSE – allow to drench or submerge for 1 minute.
- FLUSH / FILL – allow to drench or submerge for 1 minute.
Mix recommended strength in the corner of a designated plastic mixing container. Let the solution activate for 1 minute before dilution, then fill with water. Agitate until mixed. Use as a solution in a manner consistent with usual standards.
REFERENCES.
Guo, Q., Lv, X., Xu, F., Zhang, Y., Wang, J., Lin, H., & Wu, B. (2013). Chlorine dioxide treatment decreases respiration and ethylene synthesis in fresh‐cut ‘H ami’melon fruit. International journal of food science & technology, 48(9), 1775-1782.
Junli, H., Li, W., Nenqi, R., Li, L. X., Fun, S. R., & Guanle, Y. (1997). Disinfection effect of chlorine dioxide on viruses, algae and animal planktons in water. Water Research, 31(3), 455-460.
Korn, C., Andrews, R. C., & Escobar, M. D. (2002). Development of chlorine dioxide-related by-product models for drinking water treatment. Water Research, 36(1), 330-342.
Kuzniewski, S. (2022). EPA’s detection methods, the drinking water treatability database, and innovative technologies for PFAS remediation. Remediation Journal, 32(4), 309-323.Smith, A. J., Bagg, J., & Hood, J. (2001). Use of chlorine dioxide to disinfect dental unit waterlines. Journal of Hospital Infection, 49(4), 285-288.
